3.6 New Curve and Mountain Handling
===================================

curves, -c

mountains, -m

TTD does not take into account the differences in the various train.
.
The argument to mountain and curve is a four-digit number, one digit for each of the four land-based vehicle types: railroad, monorail, maglev and road vehicles. For each, you specify one digit from 0 to 3 with the following meanings:

0 means "normal", i.e. the regular TTD behaviour
1 means "faster", the vehicles doesn't slow down as much on mountains and curves
2 means "full speed", the vehicles move without slowing down at all
3 means "realistic", using a more realistic model for acceleration (see Realistic Acceleration).
For example, you might specify mountains 3320, which means: railroad and monorail are realistic (3), maglev is "full speed" (2) and road vehicles are normal (0).

If the electrifiedrailway switch is on (see Electrified Railways), the meaning of the argument slightly changes: the second digit controls electrified railroad instead of monorail, and the third digit controls the combined monorail/maglev system.





also, folgende Standartwerte sind in Deiner cfg, spiel damit.

bridgespeedlimits=90
mountains=3320
curves=3320